NuScale Completes Key Milestone with NRC

  • NRC Issues Final Safety Evaluation Report for NuScale Small Modular Reactor
  • Holtec Successfully Completes Canadian Nuclear Safety Commission Phase 1 Vendor Design Review
  • NRC releases Draft Environmental Impact Statement for Interim Storage Partners’ Consolidated Interim Storage Facility

The Nuclear Regulatory Commission (NRC) has issued a final safety evaluation report for NuScale’s small modular reactor design. This meets the agency’s original 42-month technical review schedule and demonstrates the NRC’s commitment to timely licensing of safe technologies for new, advanced reactors. The NRC is preparing a rulemaking to certify the design.

The NRC completed Phase 6 review — the last and final phase—of the Design Certification Application (DCA) for the company’s small modular reactor (SMR) with the issuance of the Final Safety Evaluation Report (FSER).

The FSER represents completion of the technical review and approval of the NuScale SMR design.

With this final phase of NuScale’s DCA now complete, customers can proceed with plans to develop NuScale power plants with the understanding that the NRC has approved the safety aspects of the NuScale design.

NuScale applied on Dec. 31, 2016, for certification of the company’s SMR design for use in the United States; the NRC accepted the design for review in March 2017.

The review process demonstrated the simplicity of NuScale’s SMR design and the thoroughness of the company’s application. As an example, during the rigorous Phase 1 review process, which included 115,000 hours spent reviewing the DCA, the NRC issued far fewer requests for additional information compared to other design certification applications.

NuScale spent over $500 million, with the backing of Fluor, and over 2 million labor hours to develop the information needed to prepare its DCA application. The company also submitted 14 separate Topical Reports in addition to the over 12,000 pages for its DCA application and provided more than 2 million pages of supporting information for NRC audits.

Neither a standard design approval nor a design certification grant permission to build or operate a reactor. Full certification, if granted by the Commission following the staff’s recommendation, allows a utility to reference the design when applying for a combined license to build and operate a nuclear power plant.

The design uses natural “passive” processes such as convection and gravity in its operating systems and safety features to produce approximately 50MW of electricity for each module. The SMR’s 12 modulesare all submerged in a safety-related pool built below ground level. The NRC concludes the design’s passive features will ensure the nuclear power plant would shut down safely and remain safe under emergency conditions, if necessary.

NuScale has indicated it will apply in 2022 for a standard design approval of a 60-megawatt-per-module version of the design. That version will require additional NRC review.

NuScale Takes a Victory Lap
 
NuScale Chairman and Chief Executive Officer John Hopkins said, “This is a significant milestone not only for NuScale, but also for the entire U.S. nuclear sector and the other advanced nuclear technologies that will follow. This clearly establishes the leadership of NuScale and the U.S. in the race to bring SMRs to market.”

“The approval of NuScale’s design is an incredible accomplishment and we would like to extend our deepest thanks to the NRC for their comprehensive review, to the U.S. Department of Energy (DOE) for its continued commitment to our successful private-public partnership to bring the country’s first SMR to market, and to the many other individuals who have dedicated countless hours to make this extraordinary moment a reality.”

“Additionally, the cost-shared funding provided by Congress over the past several years has accelerated NuScale’s advancement through the NRC Design Certification process. This is what DOE’s SMR Program was created to do, and our success is credited to strong bipartisan support from Congress.”

NuScale Vice President of Regulatory Affairs Tom Bergman said, “The NRC embraced the challenge of reviewing the first-ever small modular reactor DCA, which at the time not only marked an important milestone for NuScale, but also for the nuclear industry as a whole.”

NuScale appreciates the dedication, time, and effort of the NRC throughout this multi-year process, often with reviews completing ahead of schedule. As a long-time former NRC employee, including as an executive in the Office of New Reactors, I can say that this early issuance of the FSER is truly a credit to everyone at the NRC—including technical review and project staff, management, and the Commission.”
 
What’s Next for NuScale? 

NuScale said it continues to maintain strong program momentum toward commercialization of its SMR technology, including supply chain development, standard plant design, planning of plant delivery activities, and startup and commissioning plans.

The company fields growing domestic and international customer interest from those who see the NuScale power plant as a long-term solution for providing reliable, safe, affordable, and operationally flexible carbon-free energy for diverse applications.

NuScale has signed agreements with entities in the U.S., Canada, Romania, the Czech Republic, and Jordan. Similar agreements with other entities are being negotiated.

NuScale’s first customer. UAMPS, is working with the vendor to develop the first of a kind installation at a site at the Idaho National Laboratory. However, UAMPS also recently said its member cities and utilities might not need the reactor until 2030, a 2-year setback from the original delivery target date.

Nuclear Energy Institute Statement on NuScale FSER

Marc Nichol, senior director of new reactors at the Nuclear Energy Institute said, “The approval of NuScale’s small modular reactor design is not only a monumental milestone for NuScale but is a crucial step for the future of the industry. As the first U.S. small modular reactor design to be issued a FSER, NuScale is pioneering the way for additional innovative advanced nuclear technologies under development.

“NuScale’s design approval, the first of its kind, brings the country closer to meeting its clean energy goals and making electricity more accessible for all. This milestone demonstrates the nuclear industry can meet the demands for reliable, safe and affordable carbon-free energy here in the U.S. but also meet the demands of customers across the world.”

Holtec Successfully Completes Canadian Nuclear Safety Commission Phase 1 Vendor Design Review

Holtec International’s SMR, LLC has successfully completed Phase 1 of the Canadian Nuclear Safety Commission (CNSC) “Pre-Licensing Review of a Vendor’s Reactor Design” for its small modular reactor design, the SMR-160.

A Vendor Design Review (VDR) is an assessment service CNSC provides to nuclear power plant designers. The benefits of this direct engagement are early feedback on the SMR-160 design as it addresses CNSC regulatory requirements and early identification and resolution of potential regulatory or technical issues on the design process.

The CNSC staff concluded that “overall, SMR, LLC understands and has correctly interpreted the high-level intent of CNSC’s regulatory requirements for the design of nuclear power plants in Canada pertaining to the scope of the Phase 1 VDR.”

“This milestone reinforces our expectation that the SMR-160 will meet Canada’s regulatory requirements while also providing valuable feedback that will allow us to further improve the design throughout the ongoing regulatory process,” said Dr. Kris Singh, President and Chief Executive Officer of Holtec International.

SMR, LLC started Phase 1 of the VDR in mid-2018, addressing the associated 19 focus areas and submitting hundreds of documents over the course of 18 months to support the review.

Successfully concluding Phase 1 demonstrates the significant progression of the design and associated engineering processes. As expected, the CNSC identified some areas that require follow-up in Phase 2 of the VDR as the review moves further into the details of the design.

Based on feedback received from the Phase 1 VDR, SMR, Holtec LLC plans to pursue a Phase 2 VDR in the near future, to continue this process for its walk-away safe reactor in order to gain assurance of a path to licensing certainty in Canada.

NRC releases Draft Environmental Impact Statement for
Interim Storage Partners’ Consolidated Interim Storage Facility
for Used Nuclear Fuel

Interim Storage Partners received notification on 08/27/20 from the U.S. Nuclear Regulatory Commission of a favorable finding included in a Draft Environmental Impact Statement (DEIS) for ISP’s consolidated interim storage facility (CISF) application.

The DEIS concludes that the application submitted by ISP, a joint venture of Orano USA and Waste Control Specialists, to construct and operate a consolidated interim storage facility for used nuclear fuel at the existing WCS storage site in Andrews County, Texas, will have no discernable negative effects on the environment or natural resources.

Following a public comment period, the current NRC schedule calls for the development of a final EIS during the second quarter of 2021.

In addition to the EIS, the NRC staff is concurrently conducting an analysis and review of the technical safety aspects of the ISP application. This effort, also scheduled to conclude during the second quarter of 2021, will result in a staff Safety Evaluation Report (SER). The completed EIS and SER would form the basis for the issuance of a license by the NRC.

# # #

About djysrv

Dan Yurman ~ For breaking nuclear news follow me on Twitter @djysrv or https://www.twitter.com/djysrv ~ About this blog and disclaimers for NeutronBytes Blog ~ https://neutronbytes.com/2014/08/31/welcome-post/ ~ Email me: neutronbytes [at] gmail [dot] com ~ Mobile via Google Voice 216-369-7194 ~ I am not active on Facebook. ~ Header Image Credit: http://apod.nasa.gov/apod/ap110904.html ~ ** Emails sent by readers about blog posts are considered to be comments for publication unless otherwise noted. ** The content of this blog is protected by copyright laws of the U.S. "Fair use" provisions apply. The RSS feed is for personal use only unless otherwise explicitly granted.
This entry was posted in Nuclear. Bookmark the permalink.

1 Response to NuScale Completes Key Milestone with NRC

  1. Marcel Williams says:

    The TVA should order at least 6 GWe of NuScale capacity for just one of its nuclear facilities. Most of that electricity should be used for the production of eMethanol through the electrolysis of water to produce hydrogen and the extraction of CO2 from the atmosphere.

    Most of the eMethanol should be used to power the TVA’s natural gas electric power plants. Such natural gas facilities can be cheaply modified to use methanol. And methanol produces electricity more efficiently than natural gas. The CO2 from the flu gases from these facilities should be captured and recycled to produce even more eMethanol. So the process would be more than carbon neutral– it would be carbon negative. Plus, methanol is a lot safer and easier to store than natural gas. Recycled CO2 from flu gas should also be significantly cheaper than the initial CO2 extracted from the atmosphere which should lower the cost of eMethanol.

    Some of the eMethanol should probably be converted into gasoline and dimethyl ether (a diesel fuel substitute) to simply demonstrate that the US can produce– carbon neutral gasoline and dimethyl ether for its trucks and automobiles through nuclear energy. And maybe some of the methanol should be converted into jet fuel to demonstrate that nuclear energy can also produce aviation fuel.

    This would serve as a model for the other existing nuclear sites in the US.

    Marcel

    Like

Comments are closed.